Dongguan Zhengyu Technology Co., Ltd.
Add to Cart
Model: ASTRO-QY22
一,Printed circuit board metallographic section sampling machine (fully automatic)
Application: for sampling in metallography laboratory of PCB factory (PCB board has no assembling component)
二, Technical parameters:
1. Maximum sampler size: length x width x height = 50x50x8mm;
2.Set sampling size: according to customer requirements to determine (usually 20 mm x 15 mm)
3.Maximum sample size 16“* 24”(can reach any position on PCB board)
4.Sampler spindle: 24000R/min/AC220V/50HZ
5.Sampler Gong knife: 1/8”(free to change gong knife, 2.0 mm recommended)
6, feeding method: set the sampling size 0-50 mm (arbitrarily set) after the automatic feeding, until the slice is completely removed;
7.The sampler is equipped with a vacuum cleaner
8.Shape: 700x680x1400mm
9, infrared lamp positioning;
10, PLC programming control;
11, the sampling machine adopts drilling and milling method to avoid sample deformation and ensure test accuracy;
12. The precision of the sampler is plus or minus 0.2 mm